Fit Guide

Step 1: Check your saddle

3DP Velo uses the threaded holes on the bottom of your saddle to attach our mounts. Check your saddle for these threaded holes. Each brand has different spacing which can be seen below:

Step 2: Measure your saddle bag

If you use a saddle bag, check that it is compatible with your desired mount. For example, some of our horizontal mounts (left) extend behind the threaded holes on your saddle. If you use a large saddle bag, you may need an extended length mount.

The product page for each mount will show a saddle bag clearance in the Saddle Compatibility section. This quoted clearance is measured from the center of the bolt holes on your saddle (shown above) to the edge of the mount that would be closest to your saddle bag.

Step 3: Select your mount

After confirming that your saddle and saddle bag are compatible, pick your mount! We offer vertical and horizontal configurations so you can customize the look of your bike.